FXL2SD106: Low-Voltage Dual-Supply 6-Bit Voltage Translator with Auto-Direction Sensing

Description: The FXL2SD106 is a configurable dual-voltage-suppl...
  • The FXL2SD106 is a configurable dual-voltage-supply translator designed for both uni-directional and bidirectional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A port tracks the VCCA level and the B port tracks the VCCB level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V.
    The device remains in 3-state until both VCC reach active levels, allowing either VCC to be powered-up first. Internal power-down control circuits place the device in 3-state if either VCC is removed.
    The OE input, when low, disables both A and B ports by placing them in a 3-state condition. The FXL2SD106 is designed so that OE and CLK IN are supplied by VCCA.
    The device senses an input signal on A or B port automatically. The input signal is transferred to the other port.
    The FXL2SD106 is not designed for SD card applications. The internal bus hold circuitry conflicts with pull-up resistors. SD cards have internal pull-up resistors on the CD/DAT3 pins.
  • Features
  • Bi-Directional Interface between Two Levels: 1.1V and 3.6V
  • Fully Configurable: Inputs and Outputs Track VCC Level
  • Non-Preferential Power-up; Either VCC May Be Powered-up First
  • Outputs Remain in 3-State until Active VCC Level is Reached
  • Outputs Switch to 3-State if Either VCC is at GND
  • Power-Off Protection
  • Bus HOLD on Data Inputs Eliminates Need for Pullup Resistors (Do NOT Use Resistors on the A or B Ports)
  • OE and CLK IN are Referenced to VCCA Voltage
  • Packaged in 16-Terminal DQFN (2.5mm x 3.5mm)
  • Direction Control Not Needed
  • 80Mbps Throughput Translating between 1.8V and 2.5V
  • ESD Protection Exceeds:
  • 12kV HBM (B port I/O to GND) (per JESD22-A114 & Mil Std 883e 3015.7)
  • 8kV HBM (A port I/O to GND) (per JESD22-A114 & Mil Std 883e 3015.7)
  • 1kV CDM (per ESD STM 5.3)
  • Applications
  • This product is general usage and suitable for many different applications.
  • Technical Documentation & Design Resources
    Availability and Samples
  • Status: Active
  • Compliance: Pb-free Halide free 
  • Description: Low-Voltage Dual-Supply 6-Bit Voltage Translator with Auto-Direction Sensing
  • Package Type: WQFN-16
  • Package Case Outline: 510CC
  • MSL: 1
  • Container Type: REEL
  • Container Qty: 3000
  • Inventory

  • Market Leadtime (weeks):Contact Factory
  • Arrow:0
  • Digikey:>1K
  • Mouser:>1K
  • ON Semiconductor:27,000
  • Specifications
  • Channels:
  • Input Level: CMOS 
  • VCC Min (V): 1.1 
  • VCC Max (V): 3.6 
  • tpd Max (ns): 3.5 
  • IO Max (mA): 18 
  • Package Type: WQFN-16 
  • ON Semiconductor Full Web Site