NCV7710: Door Module Driver (Lock Driver)

Description: The NCV7710 is a powerful Driver-IC for automotive...
  • The NCV7710 is a powerful Driver-IC for automotive body control systems. The IC is designed to control lock motor in the door of a vehicle. With the monolithic full-bridge driver stage, the IC is able to control lock motor. The NCV7710 is controlled thru a 24 bit SPI interface with in-frame response.
  • Features
  • Operating Range from 5.5 V to 28 V
  • Two High-Side and Two Low-Side Drivers Connected as Halfbridges
    - 2 Half−bridges Iload = 6 A; Rdson = 150 mΩ @ 25°C
  • Programmable Soft-start Function to Drive Loads with Higher Inrush Currents as Current Limitation Value
  • Support of PWM Control Frequency Outside the Audible Noise
  • Support of Active Freewheeling to Reduce Power Dissipation
  • Multiplex Current Sense Analog Output for Advanced Load Monitoring
  • Very Low Current Consumption in Standby Mode
  • Charge Pump Output to Control an External Reverse Polarity Protection MOSFET
  • 24-Bit SPI Interface for Output Control and Diagnostic
  • Protection Against Short Circuit, Overvoltage and Overtemperature
  • Downwards Pin-to-pin and SPI Registers Compatible with NCV7707
  • Applications
  • De-centralized Door Electronic Systems
  • Rear Door Electronic Unit
  • Body Control Units (BCUs)
  • Several H−bridge Applications
  • End Products
  • Automobiles
  • Technical Documentation & Design Resources
    Product Change Notification
    Availability and Samples
  • Status: Active
  • Compliance: AEC Qualified PPAP Capable Pb-free Halide free 
  • Description: Door Module Driver (Lock Driver)
  • Package Type: SSOP-36 EP
  • Package Case Outline: 940AB
  • MSL: 3
  • Container Type: REEL
  • Container Qty: 1500
  • Specifications
  • Number of Drivers:
  • VCC Max (V):
  • V(BR)GSS Max (V): 5.5 
  • V(BR)DSS Max (V): 40 
  • ID Max (A):
  • rDS(on) Max (Ω): 0.3 
  • Tj Max (°C): 150 
  • Package Type: SSOP-36 EP 
  • ON Semiconductor Full Web Site