NCP1096: Power Over Ethernet – Powered Device Interface Controller with integrated hot swap FET, IEEE 802.3bt - PRODUCT PREVIEW ONLY

Description: The Power Over Ethernet (PoE) – Powered Device (PD...
  • The Power Over Ethernet (PoE) – Powered Device (PD) Interface Controller, NCP1096 ASSP contains all features needed to implement an IEEE.3bt, IEEE 802.3af, and/or IEEE 802.3at application. This includes detection, classification, and current limiting during the inrush phase. The NCP1096 supports high power applications up to 90W with an integrated hot swap FET. A power good and PSE type pin guarantee a proper enabling/disabling of the DC/DC for type I, II, III and IV operation.
  • Features
  • Fully Supports IEEE.3bt, IEEE 802.3af and IEEE 802.3at specifications. - Allows for guaranteed interoperability
  • Applications
  • Voice over IP
  • Wireless access points
  • IP camera
  • End Products
  • WiMax
  • Technical Documentation & Design Resources
    Evaluation/Development Tool Information
    Availability and Samples
    NCP1096PAG
  • Status: Active
  • Compliance: Pb-free Halide free 
  • Description: Power Over Ethernet – Powered Device Interface Controller with integrated hot swap FET, IEEE 802.3bt - PRODUCT PREVIEW ONLY
  • Package Type: TSSOP-16 EP
  • Package Case Outline: 948BV
  • MSL: 2
  • Container Type: TUBE
  • Container Qty: 96
  • NCP1096PAR2G
  • Status: Active
  • Compliance: Pb-free Halide free 
  • Description: Power Over Ethernet – Powered Device Interface Controller with integrated hot swap FET, IEEE 802.3bt - PRODUCT PREVIEW ONLY
  • Package Type: TSSOP-16 EP
  • Package Case Outline: 948BV
  • MSL: 2
  • Container Type: REEL
  • Container Qty: 4000
  • Specifications
  • Topology:  
  • Phases:  
  • Control Mode:  
  • VCC Min (V): 34.2 
  • VCC Max (V): 57 
  • fSW Typ (kHz):  
  • Package Type: TSSOP-16 EP 
  • ON Semiconductor Full Web Site