NRVBD1035CTL: Schottky Power Rectifier, Switch-mode, 35 V, 10 A

Description: The Schottky Rectifier employs the Schottky Barrie...
  • The Schottky Rectifier employs the Schottky Barrier principle in a large area metal-to-silicon power diode. State of the art geometry features epitaxial construction with oxide passivation and metal overlay contact. It is ideally suited for use as rectifiers in low voltage, high frequency inverters, free wheeling diodes and polarity protection diodes.
  • Features
  • Short Heat Sink Tap Manufactured - Not Sheared
  • Lead and Mounting Surface Temperature for Soldering Purposes: 260 C Max. for 10 Seconds
  • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
  • Epoxy Meets UL94, VO at 1/8

    Mechanical Characteristics:
  • Very Low Forward Voltage Drop
  • Weight: 0.4 gram (approximately)
  • Available in 16 mm Tape and Reel, 2500 units per Reel, Add T4 to Suffix part #
  • Marking: B1035CL
  • Guardring for Stress Protection
  • Matched dual die construction - May be Paralleled for High Current Output
  • Highly Stable Oxide Passivated Junction
  • High dv/dt Capability
  • Case: Epoxy, Molded
  • Technical Documentation & Design Resources
    Availability and Samples
  • Status: Active
  • Compliance: AEC Qualified PPAP Capable Pb-free 
  • Description: Schottky Power Rectifier, Switch-mode, 35 V, 10 A
  • Package Type: DPAK-3
  • Package Case Outline: 369C
  • MSL: 1
  • Container Type: REEL
  • Container Qty: 2500
  • Specifications
  • Configuration: Common Cathode 
  • VRRM Min (V): 35 
  • VF Max (V): 0.56 
  • IRM Max (µA): 2000 
  • IO(rec) Max (A): 10 
  • IFSM Max (A): 50 
  • trr Max (ns):
  • Cj Max (pF):
  • Package Type: DPAK-3 
  • ON Semiconductor Full Web Site